loading

Einar Ágústsson & Co. Sími:  577-3900

Röðun
LED Ljós m/segli

Magnetic LED Lamp

• For illuminating dark working areas
• Attachment to tool by means of strong magnets
• Very compact dimensions
• Approx. 24 hours of lighting, with 2 replaceable button cells (CR1220)
• Snap-hook fastening
• Impact-resistant plastic housing

Bursti fyrir teinagöt M16-28. RAWL

Rawlplug Hole Brush, M16-M28

Brush accessory for cleaning out holes, prior to anchor installation. Wound metal rod with plastic bristles. For M16- M28 diameter holes.

Bursti fyrir teinagöt M10-14. RAWL

Rawlplug Hole Brush, M10-M14

Brush accessory for cleaning out holes, prior to anchor installation. Wound metal rod with plastic bristles. For M10- M14 diameter holes.

Bursti fyrir teinagöt M8-10. RAWL

Rawlplug Hole Brush, M8-M10

Brush accessory for cleaning out holes, prior to anchor installation. Wound metal rod with plastic bristles. For M8- M10 diameter holes.

Pumpa fyrir teinagöt. RAWL

Manual blow pump ideal for cleaning dust from drilled holes.

Accessory used for cleaning out anchoring holes in concrete and masonry.

• Manual, easy to use
• Ideal for cleaning dust from drilled holes prior to applying bonded anchors or installing mechanical anchors
• Serial application
• Hole cleaning is necessary for correct loads

VÍRBURSTI 5RAÐIR

KWB Vírbursti, 5 raðir

Viðarskaft með fimm röðum af beinum og stífum stál vír, til að þrífa og fjarlægja ryð. Má nota á við og málm.

VÍRBURSTI 4 RAÐIR

KWB Vírbursti, 4 raðir

Viðarskaft með fjórum röðum af beinum og stífum stál vír, til að þrífa og fjarlægja ryð. Má nota á við og málm.

GLUGGASKAFA (2)

Window Scraper, 60 x 19 mm

• Solid scraper with 60 x 19 mm trapezoid blade, an indispensable helper in household or workshop. 
• Dirt, paint, labels are easily removed from window panes, mirrors, glass cooktops, with the 43 mm wide double-sided scraper blade.
• The slider is pulled out of the locking mechanism for use. The slider should be pushed back into the locking mechanism after use to prevent injuries.
• No tools required to change the blades.

BLAÐ F/SKÖFU 50MM

Blades for Scraper

• Tungsten carbide blade. 
• Ground both sides. 
• Double-sided.
• Pack of three 50 mm blades.

SKAFA 50MM BLAÐ

Scraper

• Tungsten carbide blade.
• Ground both sides.
• Light alloy holder with 2-component grip.
• For cleaning and removal of paint and varnish residues.
• 50 mm wide.

VÍRBURSTI 3 RAÐIR (12)

KWB Vírbursti, 3 raðir

Viðarskaft með þrem röðum af beinum og stífum stál vír, til að þrífa og fjarlægja ryð. Má nota á við og málm.

AIRSTOP ROLL roller hard

38 mm wide pressing roller. Suitable for OMEGA UDOs Pipe sleeve, OMEGA UDOs outside corner onto OMEGA UDOs 330 Roof underlay.

AIRSTOP ROLL cellular roller

40mm wide pressing roller, made of cellular rubber. Highly suitable for applying even pressure during the application of acrylic adhesive tapes.

Vírbursti kopar pl/hald.

Brass wire scratch brush with plastic handle.

Kúbein, Hultafors 108 Mini

Hultafors Mini Kúbein

Lítið en nytsamlegt 19 cm stál kúbein. Má nota til að draga nagla, þvinga í sundur við eða til að opna dósir.

• Getur dregið nagla á þrjá mismunandi vegu.
• Hentar vel til notkunar í þröngum rýmum, sökum smæðar.

Kúbein, Hultafors 109/900mm

Hultafors Kúbein, 900 mm

Kúbein úr hertri stál & bór blöndu, 900 mm langt.  

• Breiðir snertifletir við jörð og mjóir endar, svo kúbeinið nýtist betur í þrengslum og skilji síður eftir sig för.
• Klaufin hentar vel til að draga nagla.

Kúbein, Hultafors 109/710mm

Hultafors Kúbein, 71 cm

Kúbein úr hertri stál & bór blöndu, 71 cm langt.  

• Breiðir snertifletir við jörð og mjóir endar, svo kúbeinið nýtist betur í þrengslum og skilji síður eftir sig för.
• Klaufin hentar vel til að draga nagla.

Kúbein, Hultafors 109/625mm

Hultafors Kúbein, 625 mm

Kúbein úr hertri stál & bór blöndu, 625 mm langt.  

• Breiðir snertifletir við jörð og mjóir endar, svo kúbeinið nýtist betur í þrengslum og skilji síður eftir sig för.
• Klaufin hentar vel til að draga nagla.

SÍLAR RÚNAÐIR (2)

Awl

CrV steel, 3-component grip for optimal power transfer and slip-free working, matt chrome plated, with chemically blacked precision tips, for pricking of openings in wood for easier screw centring. Quickly distinguishable colour code system shows the desired blade shape. With practical screwdriver holder for the workshop, simply screw the plastic clip on the workshop wall.

VINKILDRIF F/SKRÚFBITA 360

360 Angle Drilling Attachment

Compact 360 degree angle drilling attachment with 10 mm keyless chuck. By unscrewing the ball joint the chuck can quickly be aligned in any desired position in a 360 degree circle. This makes the tools suitable for left- and right-handers. Simply turn the handle to lock the ball joint. The textured rubber handle gives a solid grip for drilling even in the most awkward situations. For safety reasons the maximum drill length/ diameter to be used is 190 mm / 3/4". Thanks to the planetary gear inside you can take on the toughest jobs including building and assembly work. With its hexagon drive shaft the attachment fits easily into standard cordless and mains drills. The unit is not suitable for use with holesaws, or longer drill bits such as wall drills, framework drills and augers.

Sýni 1-20 af 59 hlutum
Vörumerki