Window scraper

Solid scraper with 60 x 19 mm trapezoid blade, an indispensable helper in household or workshop, dirt, paint, labels are easily removed from window panes, mirrors, glass cooktops, with the 43 mm wide double-sided scraper blade. The slider is pulled out of the locking mechanism for use. The slider should be pushed back into the locking mechanism after use to prevent injuries. No tools required to change the blades.

Hobby knife

The ideal companion for leisure and hobby. With a 7.5 cm long stainless steel switchblade and an aluminium and plastic shell-type handle, incl. nylon belt bag.

Professional emergency tool, ideal for the car for rescue after an accident, with 90 mm long razor-sharp rustproof switch blade made of 440 A performance steel, secure locking of the blade, glass breaker, seat belt cutter, belt clip and shell type aluminium handles with Fire Dept symbol.

Toothed adhesive spreader

Bright sheet metal blade, trapezium shaped, wooden handle. For applying glue, tile adhesive, render and plaster.
180 mm wide, 6 mm spacing between teeth.

Toothed adhesive spreader

Bright sheet metal blade, trapezium shaped, wooden handle. For applying glue, tile adhesive, render and plaster.
180 mm wide, 4 mm spacing between teeth.

Silicone spatula

Rubber, for smoothing and removal of excess sealant on newly applied silicone beads.

134 x 64 x 9 mm

Painter's scraper

Flexible metal blade, with clear lacquered wooden handle, for removing wallpaper on flat surfaces, in corners and on edges, for applying fillers and adhesives, for removing adhesive residues and surface contamination, ideal for working on lime, concrete and wood, scrapers can be used to make a clean surface for painting, easily removes glue residues and encrusted grime.

50 mm wide.

Blades for scraper

Tungsten carbide blade, ground both sides, double-sided. Pack of three 50 mm blades.

Scraper
 

Tungsten carbide blade, ground both sides, light alloy holder with 2-component grip, for cleaning and removal of paint and varnish residues.

Plunge-cut sawblade set, 5 pieces

Cuts wood up to 48 mm. For wood, gypsum cardboard and soft fabric. Easy plunging into the material at any position, for cutting into wood, slabs, laminate, parquet, plastic. E.g. plunge cutting into kitchen countertops for air grilles, in cabinets or gypsum board for access to power outlets without any problems. 22 mm wide.

Stiwex Basic 1200 Paint Brush
15 mm

Plastic paint brush, good for one-off jobs. Packed in an economical packaging. Good quality at low price.

Hand Wire Brush

Steel wire, straight, tough, tight, with a wooden handle, for cleaning and de-rusting, for wood and metal.

KWB Aggresso-flex two-hole spanner

• Best used with flat laying options on the flex.
• For clamping rings with a diameter of 5 mm and a hole spacing of 35 mm at separation sanders.
• The end hole wrench is manufactured according to the standards of DIN 3116 and suitable for all standard one-handed angle grinders.

Solid switchblade hunting knife, 16 cm long, with 60 mm hollow ground rustproof blade, ergonomic handle, shell-type handle on one side ground from wood, safe locking of the open and closed knife, ideal for camping, hunting, leisure, trekking or as sheath knife.

38 mm wide pressing roller. Suitable for OMEGA UDOs Pipe sleeve, OMEGA UDOs outside corner onto OMEGA UDOs 330 Roof underlay.

40mm wide pressing roller, made of cellular rubber. Highly suitable for applying even pressure during the application of acrylic adhesive tapes.

The kwb EXTREME FORCE impact bits were developed for extreme requirements and are absolutely impact-resistand and thus especially suitable for use in impact screwdrivers. Made of TQ 60 steel. The maximum-length torsion zone of the 30 mm long bit provides for over-average tool life also with most extreme requirements. With colour code rings to distinguish the shape of the head. 1/4" C 6.3 shank. T 40.

The kwb EXTREME FORCE impact bits were developed for extreme requirements and are absolutely impact-resistand and thus especially suitable for use in impact screwdrivers. Made of TQ 60 steel. The maximum-length torsion zone of the 30 mm long bit provides for over-average tool life also with most extreme requirements. With colour code rings to distinguish the shape of the head. 1/4" C 6.3 shank. T 25.

The kwb EXTREME FORCE impact bits were developed for extreme requirements and are absolutely impact-resistand and thus especially suitable for use in impact screwdrivers. Made of TQ 60 steel. The maximum-length torsion zone of the 30 mm long bit provides for over-average tool life also with most extreme requirements. With colour code rings to distinguish the shape of the head. 1/4" C 6.3 shank. T 30.

The kwb EXTREME FORCE impact bits were developed for extreme requirements and are absolutely impact-resistand and thus especially suitable for use in impact screwdrivers. Made of TQ 60 steel. The maximum-length torsion zone of the 30 mm long bit provides for over-average tool life also with most extreme requirements. With colour code rings to distinguish the shape of the head. 1/4" C 6.3 shank. T20.