loading

Einar Ágústsson & Co. Sími:  577-3900

Röðun
VÍRHJÓL SNÚ.115MM (10)

Aggresso-Flex Wheel Brush, HSS Steel

Ø 115
14 mm internal thread
0,5 mm wire diameter 

Wheel brush, HSS steel wire, twist knot. For derusting, removal of surface coatings, paint, heavy rust and floor coverings, descaling, deburring and removing of welding marks, for metal and stone, for working on narrow edges, frames and gratings.
 

SLÍPIBOLLI DEMANTS. 115 X 22

Aggresso-Flex diamond face grinding disc

Ø 155 x 22,23 mm

Diamond face grinding cup, single row of diamond segments, laser welded for high performance grinding and cleaning operations for professional use, for cleaning and grinding of concrete, screed, render, mortar and natural stone, for all commonly used angle grinders with peripheral disc speed of 80 m/s.

VÍRBOLLAR SNÚ. 66MM M-14 (12)

Aggresso-Flex Cup Brush, Steel Wire, Twist Knot bulk

Ø 66 mm
14 mm internal thread
0,5 mm wire

Cup brush, HSS steel wire, twist knot. For derusting, removal of surface coatings, paint, heavy rust and floor coverings, cleaning of shuttering and facades, descaling, deburring, for metal and stone, for working on fairly large areas.



 

FLIPA SLÍPISK/ST SLTT1250 CERAMI60 (10)

Flexible lamellar flap disc for machining hard-to-reach areas. Perfect for deburring, fettling, derusting, smoothening and weld seam machining.

The small resin core with practical M14 thread allows for a larger flap projection. This makes the grinding disc flexible, it can adapt itself to uneven surfaces, and requires little effort when working.
With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the carrier. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Reccomended for stainless steel, steel and titanium.
125 mm diameter. 
14M internal thread.
Grain 60.

Further technical information available on manufacturers website; 
https://lukas-erzett.com/en/shop/sltt-universal-lamellar-flap-disc-o-125-mm-ceramic-grain-60-flat/

FLIPA SLÍPISK/ST SLTT1250 CERAMIC40 (10)

This efficient and extremely powerful flap disc with crescent flaps and ceramic grain is the perfect and greatly improved alternative to grinding discs or conventional flap discs. It is perfect for deburring, fettling, derusting, smoothening and weld seam machining. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. Thanks to its 22.23 mm bore, this flap disc can be used with any commercially available angle grinder. The steel carrier of this flap disc is only available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Reccomended for stainless steel, steel and titanium.
125 mm diameter. 
14M internal thread.
Grain 40.

Further technical information available on manufacturers website; 
https://lukas-erzett.com/en/shop/sltt-universal-lamellar-flap-disc-o-125-mm-ceramic-grain-40-flat/

SLÍPISK P.GRAIN SINGLE125 CERAM36 (10)

Purple grain single compact flap disc

  • Ceramic grain 36
  • 125 mm diameter
  • Depressed shape
  • M14 internal thread
  • Recommended for use on titanium, steel, stainless steel, and cast materials.

Further information available on manufacturers website;
https://lukas-erzett.com/en/shop/purple-grain-single-compact-flap-disc-o-125-mm-ceramic-grain-36-depressed/

FLÓKASKÍFA F/ROKK 115MM

Polycarbide Cleaning Wheels, Carded

• Size: 115 x 22 mm
• Nylon backing.
• Bonded to silicon carbide abrasive.
• Working width 13mm.
• For precise working up to edges with the edge or the face of the disc.
• Flexible.
• For sanding and cleaning of steel, sheet metal, wood, plastics and stone,
• For all common angle grinders with peripheral disc speed of 80 m/s.
• Max Rpb:11.000

FLÓKASKÍFA F/ROKK 125MM

Polycarbide Cleaning Wheels, Carded

• Size: 125 x 22 mm
• Nylon backing.
• Bonded to silicon carbide abrasive.
• Working width 13mm.
• For precise working up to edges with the edge or the face of the disc.
• Flexible.
• For sanding and cleaning of steel, sheet metal, wood, plastics and stone.
• For all common angle grinders with peripheral disc speed of 80 m/s.
• Max Rpb: 9.800

FLIPPA SLÍPISKÍFUR 125MM P120 (10)

SLTR Universal lamellar flap disc 
125 mm diameter, 22,23 mm bore​
Suitable for chamfering, deburring, rough grinding and weld seam machining.
Suitable for stainless steel, steel and cast materials.

  • The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
  • Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
  • A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
  • Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.

Further technical information available on manufacturers website;
https://lukas-erzett.com/en/shop/sltr-universal-lamellar-flap-disc-o-125-mm-zirconia-alumina-grain-120-dished/

FLIPPA SLÍPISKÍFUR 125MM P60

SLTR Universal lamellar flap disc 
125 mm diameter, 22,23 mm bore​.
Suitable for chamfering, deburring, rough grinding and weld seam machining.
Reccomended for use on stainless steel, steel and cast materials.

  • The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
  • Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
  • A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
  • Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.

Further technical information available on manufacturers website;
https://lukas-erzett.com/en/shop/sltr-universal-lamellar-flap-disc-o-125-mm-zirconia-alumina-grain-120-dished/

FLIPPA SLÍPISKÍFUR 125MM P40 (10)

SLTR Universal lamellar flap disc 
125 mm diameter, 22,23 mm bore​
Grain 40
Suitable for chamfering, deburring, rough grinding and weld seam machining.
Suitable for stainless steel, tool steel, cast steel, cast iron and aluminium and nickel alloys.

  • The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
  • Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
  • A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
  • Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.

Further technical information available on manufacturers website;
https://lukas-erzett.com/en/shop/sltr-universal-lamellar-flap-disc-o-125-mm-zirconia-alumina-grain-40-dished/

FLÓKASKÍFA F/BORVÉL.100MM 13MMP (12)

Polycarbide Cleaning Wheel
Ø 100

• Polycarbide cleaning discs, coarse.
• For sanding with the edge or the face of the disc..
• Flexible.
• Nylon filaments bonded to silicon carbide abrasive.
• For cleaning and derusting on sheet steel, non-ferrous metals, plastics, stone and wood.
• For use with drills, good for working exactly up to an edge.

Sýni 1-12 af 12 hlutum
Vörumerki