loading

Einar Ágústsson & Co. Sími:  577-3900

Röðun
VÍRHJÓL SNÚ.115MM (10)

Wheel brush, HSS steel wire, twist knot, for derusting, removal of surface coatings, paint, heavy rust and floor coverings, descaling, deburring and removing of welding marks, for metal and stone, for working on narrow edges, frames and gratings.



115 mm diameter
14 mm internal thread
0,5 mm wire diameter 

SLÍPIBOLLI DEMANTS. 115 X 22

Aggresso-Flex diamond face grinding disc

Ø 155 x 22,23 mm

 

Diamond face grinding cup, single row of diamond segments, laser welded for high performance grinding and cleaning operations for professional use, for cleaning and grinding of concrete, screed, render, mortar and natural stone, for all commonly used angle grinders with peripheral disc speed of 80 m/s.

FLIPA SLÍPISK/ST SLTT1250 CERAMI60 (10)

Flexible lamellar flap disc for machining hard-to-reach areas. Perfect for deburring, fettling, derusting, smoothening and weld seam machining.

The small resin core with practical M14 thread allows for a larger flap projection. This makes the grinding disc flexible, it can adapt itself to uneven surfaces, and requires little effort when working.
With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the carrier. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Reccomended for stainless steel, steel and titanium.
125 mm diameter. 
14M internal thread.
Grain 60.

Further technical information available on manufacturers website; 
https://lukas-erzett.com/en/shop/sltt-universal-lamellar-flap-disc-o-125-mm-ceramic-grain-60-flat/

FLIPA SLÍPISK/ST SLTT1250 CERAMIC40 (10)

This efficient and extremely powerful flap disc with crescent flaps and ceramic grain is the perfect and greatly improved alternative to grinding discs or conventional flap discs. It is perfect for deburring, fettling, derusting, smoothening and weld seam machining. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. Thanks to its 22.23 mm bore, this flap disc can be used with any commercially available angle grinder. The steel carrier of this flap disc is only available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Reccomended for stainless steel, steel and titanium.
125 mm diameter. 
14M internal thread.
Grain 40.

Further technical information available on manufacturers website; 
https://lukas-erzett.com/en/shop/sltt-universal-lamellar-flap-disc-o-125-mm-ceramic-grain-40-flat/

SKURÐARSK.F/ÁL T41** 125X1,0X22,2 (50)

This cutting disc for machining aluminium and non-ferrous metals also cuts without interruption soft materials that are difficult to machine.

Dimensions; 125 x 1,0 x 22,23 mm
Grain: 60
Shape: Flat

This cutting disc delivers precise cuts at a high cutting speed combined with a low cutting temperature, and offers maximum tool life thanks to its innovative bonding technology. Thanks to its 22.23 mm bore it can be used with any commercially available angle grinder. It is energy-optimised so that it can also be used on the most powerful angle grinders. Strong glass-fibre fabric and regular testing ensure high level of safety and lateral stability. 

The dreaded clogging of the tool surface does not happen with these tools, which have been specially developed and tested for aluminium. The special combination of abrasive grain and bonding agent reliably prevents this undesirable effect. 

When in use, the cutting disc generates low odour and dust levels, and allows for ergonomic working and maximum operating times with minimum effort. Thanks to the premium quality raw materials, it offers maximum storage times with top quality stability. 

This cutting disc is manufactured in an environmentally friendly manner using state-of-the-art production processes and optimised formulations.

Further technical information available on manufacturers website;
https://lukas-erzett.com/en/shop/t41-cutting-disc-for-aluminium-125x1-mm-straight-for-angle-grinder-a60n-bf/

SLÍPISK P.GRAIN SINGLE125 CERAM36 (10)

Purple grain single compact flap disc

  • Ceramic grain 36
  • 125 mm diameter
  • Depressed shape
  • M14 internal thread
  • Recommended for use on titanium, steel, stainless steel, and cast materials.

Further information available on manufacturers website;
https://lukas-erzett.com/en/shop/purple-grain-single-compact-flap-disc-o-125-mm-ceramic-grain-36-depressed/

MULTI -TOOL-Set 7pcs. Akku

All-purpose application for wood, plastic and metal work with patented flutes for higher and faster performance and patented quick-action chuck. For clean cutting of parquet, laminate or sound insulation flooring slabs, precise cutting of door frames flush with the adjacent areas for parquet and laminate flooring, cutting of aluminium connector bars, flush cutting of protruding nails from wood or copper pipes from the wall. Trouble-free plunging into kitchen countertops for ventilation grilles, in cabinets or gypsum plasterboard slabs for access to power outlets. Effortless cutting into fibre glass for boat construction or in plastic elements. Trouble-free removal of old mastic in window frames, easy cut-outs in thin metal sheets and non-ferrous metals.

SKURÐARSKÍFA DEMAN. ÞUNN 125 X 22

DIAMANT thin cut-off blades, extra thin cutting edge, turbo shape, thickness 7,0 mm, for high cutting performance and professional long-term work, for granite, marble, concrete, ceramics, tiles, stoneware, natural and artificial stone, for all customary angular grinders with a circumferential speed of 80 m/s and in particular for cordless angular grinders.

 
Multitool, járns, AK 80mm skífa,þunn.(5)

With patented flutes for higher and faster performance and patented quick-action chuck. Easy plunging into the material at any place, for cutting into wood, plastic, glass fibre. E.g. effortless cutting of door frames for laminate floor and parquet installation, also for door frames with many profiled sections, cutting of skirting boards, kitchen countertops for ventilation grilles and other materials for which customary plunge-cut sawblades are too short. The extra long shaft allows for a cutting depth of up to 55 mm.

FLÓKASKÍFA F/ROKK 115MM

Polycarbide cleaning discs, nylon backing , bonded to silicon carbide abrasive, working width 13mm, for precise working up to edges with the edge or the face of the disc, flexible, for sanding and cleaning of steel, sheet metal, wood, plastics and stone, for all common angle grinders with peripheral disc speed of 80 m/s.

  • Size: 115 x 22 mm
  • Max Rpb:11.000
Multitool,AT timbur,plast 22mm

With patented flutes for higher and faster performance and patented quick-action chuck. Especially clean and quick cuts into hard wood, soft wood, laminate, parquet, plastic etc. Easy plunging into the material at any place, for cutting of slabs, parquet, plastic. E.g. trouble-free plunge-cuts into parquet floors, real-wood kitchen countertops for ventilation grilles, in cabinets or gypsum plasterboard slabs for access to power outlets.

Multitool,AT Flísa-fúgu hreinsir

With patented plane holes for higher and faster performance and patented quick-action chuck. Mills joints of tiles with a cutting-width of 2.2 mm up to a cutting width of 52 mm. Ideal for working up into the corners. Plunging into the material and working on even surface, e.g. ideal for straight milling or cleaning of joints, removal of damaged joints for tiles or exchange of a damaged tile. Milling of grooves into sand-limestone or gas concrete for cable ducts or pipes for concealed wiring.

Multitool,AT línuskeri plast,tré.

With patented flutes for higher and faster performance and patented quick-action chuck. Easy plunging into the material at any place, straight cuts, for cutting of slabs, parquet, plastic etc. Ideal e.g. for long, straight cuts into drywalls and wooden wall panels, for the installation of cable ducts, pipelines etc.

Multitool, Sett Universal 17stk sög/slíp

Can be used for all kinds of wood, sanding and repair work.E.g. clean cutting of laminate flooring, or sound-proofing flooring, exact, flush trimming of door frames for laminate floor installation, trimming of aluminium connector bars, flush-cutting of protruding nails from wood or copper pipe from the wall. Smooth plunge-cutting into kitchen worktops for air grilles, in cupboards or plasterboard for access to power outlets. Effortless cutting into glass fibre for boat building or into plastic elements.Problem-free removal of old putty in window frames. Easy cut-outs in thin sheet metal and non-ferrous metals. Removal of residual tile adhesive for touch-up work, concrete or mortar residues for masonry work, residual glue from carpeting removal or removal of old varnish and underfloor coatings. Sanding work for wood, varnish, matt finishing and removal of wood fibres, polishing of wood, metal and non-ferrous metal.

Multitool, Millistykki, Universal.

Using the universal adapter, the kbw all-rounder/multi-function accessories fit to many customary multi-cutters, all-rounders or multi-purpose tools: Bosch PMF 180 E, GOP 10.8 V-LI, EINHELL RT-MG 200 E RED, RT-MG 108 Li RED, BT-MG 220 E, BT-MG 180, DREMEL Multi-Max, ERGOTOOLS Plattfield E-MG 250 E, LUX TOOLS AMF 12 Li, Mac Alister MMT108, PARKSIDE, FEIN Multimaster Ø 10 mm, Rockwell/Works Sonicrafter, Craftsman Multi-Tool, Mastercraft Multi-Cutter.

Multitool, sett 4stk tré, málm, plast,

Universal use in carpentry and refurbishment, for example clean flush cuts in parquet, laminate or sound absorbing flooring, precise trimming of doors during laminated floor laying, shortening aluminium conncector bars, flush cutting off of projecting nails or copper pipes from walls. Problem-free plunge cutting in kitchen worktops for ventilation grilles, in cupboards or plasterboard for access to electrical sockets, dust-free cuts in fibreglass for boatbuilding or in plastics. Simple removal of old putty on window frames. Easy cutting out in thin sheet steel and non-ferrous metal.

Multitool, Flísaviðgerð, sett, 3 stk

Universal use for tile and mortar repair or refurbishment work, for example damaged grouting between tiles, or replacing broken tiles, precision cutting of small cut-outs in ceramic tiles for pipes or to fit corners, removing old mortar and tile adhesive from tiles, removing old carpet remnants or coarse surface preparation of concrete, stone and wood, milling grooves in brick or aerated concrete blocks for conduit or pipework to be concealed under plaster.

SKURÐARSKÍFA FLÍSAR HVÍT 125 X 22

White-Line diamond cutting discs, continuous rim, turbo pattern, 5 mm segment height, for high cutting performance in long-term professional use, for tiles, ceramics, travertin, marble, for all standard angle grinders with peripheral disc speed of 80 m/s.

SKURÐARSKÍFA DEMANT.SVÖRT.230 X 22

Black-Line diamond cutting discs, segmented rim, segments 10 mm deep, for high cutting performance in trade use, for granite, concrete blocks, hard concrete, all natural and artificial stone, for all standard angle grinders with peripheral disc speed of 80 m/s.

SKURÐARSKÍFA DEMANT.GRÆN.115 X 22

Green-Line diamond cutting discs, segmented edge, segment height 7 mm, for high cutting performance, for brick, concrete, pavers, for all standard angle grinders with peripheral disc speed of 80 m/s.

Sýni 1-20 af 109 hlutum
Vörumerki