HSS Twist Drill, with reduced shank
Ø 14 mm drill
Ø 10 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Twist Drill, with reduced shank
Ø 15 mm drill
Ø 10 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Twist Drill, with reduced shank
Ø 16 mm drill
Ø 10 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Twist Drill, with reduced shank
Ø 20 mm drill
Ø 13 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Twist Drill, with reduced shank
Ø 19 mm drill
Ø 13 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Twist Drill, with reduced shank
Ø 18 mm drill
Ø 13 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Twist Drill, with reduced shank
Ø 17 mm drill
Ø 13 mm shank
• DIN 338
• Right hand cut
• Type N
• Roll forged
• Blue-black colour
• Steam Hardened
• Tip angle 118 degree
• Reduced Shank
• For drilling large diameters with standard electric drills
• For alloyed and mild steel, castings, non-ferrous metals, hard plastics.
HSS Countersink, 12 mm
• 90°
• 5-flute
• For countersinking for flush fitting of countersunk screws in metal.
12 mm diameter head.
8 mm diameter shaft.
HI-NOX HSS M2 Metal Drill
Ø 7,5 mm
Drill length: 109 mm
Working length: 45 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 4,8 mm
Drill length: 86 mm
Working length: 32 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 1 mm
Drill length: 34 mm
Working length: 7 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 9,5 mm
Drill length: 125 mm
Working length: 57 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 2 mm
Drill length:49
Working length: 13
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 12 mm
Drill length: 151 mm
Working length: 78 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 9 mm
Drill length: 142 mm
Working length: 71 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 10 mm
Drill length: 133 mm
Working length: 63 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 spiral drill, sharpened, right-hand cut, cylindrical, colour black/uncoated, 130° point angle with special polished section, special polished spiral section with "Quick Cut" geometry for small swarf, reinforced core and spiral shoulder, specially shaped short spiral notch, extra robust, for optimal swarf removal, extremely heat-resistant, optimal cutting performance in particular in all types of stainless steel, also suitable for all steel types, cast iron and cast steel. For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 8,5 mm
Drill length: 117 mm
Working length: 51 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 8 mm
Drill length: 117 mm
Working length: 51 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.
HI-NOX HSS M2 Metal Drill
Ø 7 mm
Drill length: 109 mm
Working length: 45 mm
• Sharpened.
• Right-hand cut.
• Cylindrical.
• Colour black/uncoated.
• 130° point angle with special polished section,
• Special polished spiral section with "Quick Cut" geometry for small swarf,
• Reinforced core and spiral shoulder,
• Specially shaped short spiral notch,
• Extra robust,
• For optimal swarf removal,
• Extremely heat-resistant,
• Optimal cutting performance in particular in all types of stainless steel,
• Also suitable for all steel types, cast iron and cast steel.
• For effortless and energy-saving drilling with cordless or tethered machines.