loading

Einar Ágústsson & Co. Sími:  577-3900

Röðun
Afeinangrunarklippur Ergo STRIP

ErgoStrip Universal Stripping Tool

• For the fast and precise stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5 mm² up to 5 x 2,5 mm²), data cable (e.g. twisted pair) and coax cable
• Innovative, ergonomic pistol grip design for easy cutting, stripping and longitudinal cut of the sheath
• Conical, slimmed down tool ends for better access in confined areas
• Stripping device for cross-sections 0.2 / 0.3 / 0.8 / 1.5 / 2.5 / 4 mm²
• Simplified insertion of single wires for stripping using location ridges
• With opening spring and locking device
• Easy insertion of coax and data cable thanks to opening aid
• Multi-component design with a soft plastic zone for comfortable use and a secure grip
• Housing made from stable glass fibre reinforced plastic

BOLTAENDA KLIPPUR

Bolt End Cutting Nippers, 200 mm

• Powerful, compact, comfortable
• High lever transmission
• Compared to conventional lever-assisted end cutting nippers, greater cutting capacity, less effort required and better handling
• For all wire classes including piano wire
• Exceptional cutting capacity due to high-leverage joint
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
• Vanadium electric steel, forged, multi stage oil-hardened
• Pliers black atramentized
• Head polished
• Handles plastic coated

RÖRA KLIPPUR 185MM F. PLAST (ø12-25MM)

Pipe cutter for plastic composite pipes

• For cutting composite pipes from Ø 12 - 25 mm
• Clean, smooth and burr-free cut surfaces
• Easily exchangeable blades
• With opening spring and locking device
• Ergonomically shaped handles made of fibreglass-reinforced plastic
• Not suitable for cutting cables
• Blade made of high-strength special grade steel, oil-hardened and tempered
• Takes Knipex 90 29 01 spare blades
• Chrome plated
• Tough fibreglass reinforced plastic handles

BOLTAKLIPPUR COMP XL 250. 3,6MM (6)

CoBolt XL Compact Bolt Cutters, 250 mm

• For powerful cutting of larger cross-sections as well as very hard materials
• Two-hand operation for maximum cutting force
• 60 % less effort required compared to high leverage diagonal cutters of the same size
• 40-fold increase of manual force due to special joint design
• With gripping surface below the joint for gripping and pulling wires with a diameter as from 1.0 mm
• Induction-hardened precision blades: cutting edge hardness approx. 64 HRC
• Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened
• Straight blades

BLAÐ Í RÖRA KLIPPUR 210MM

Spare blade for 90 25 20.

SÍÐUBÍTUR PÍANÓ P2,2/H2,7 PVC (6)

High Leverage Diagonal Cutters, 180 mm

• For very tough, continuous use
• High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
• Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire
• Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened

SÍÐUBÍTUR PÍANÓ P2,0/H2,5 PVC (6)

High Leverage Diagonal Cutters, 160 mm

• For very tough, continuous use
• High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
• Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire
• Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened

SÍÐUBÍTUR PÍANÓ P1,5/H2,0 PVC (6)

High Leverage Diagonal Cutters, 140 mm

• For very tough, continuous use
• High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
• Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire
• Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened

BOLTAKLIPPUR COMP. 3,6MM (6)

CoBolt Compact Bolt Cutters, 200 mm

• Precision cutting edges for soft and hard wire as well as piano wire
• Cuts bolts, nails, rivets, etc. up to 5.2 mm dia.
• Most efficient joint design ensures exceptional cutting performance with little effort
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
• Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened
• Improved cutting performance
• Micro-structured cutting edge allows easy cutting of large cross-sections
• With gripping surface below the joint for gripping and pulling wires with a diameter as from 1.0 mm

Síðubítur Comfort (6)

Diagonal Cutter, 140 mm

• The indispensable diagonal cutter for all-round use
• High-quality material and precise workmanship for long service life
• Precision cutting edges for soft and hard wire
• Clean cutting of thin copper wires, also at the cutting edge tips
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC
• Narrow head style for use in confined areas
• Vanadium electric steel, forged, multi stage oil-hardened
• The new and more stable joint design makes the Diagonal Cutter’s cutting performance better than ever
• Comfortable multi-component grip handles

SÍÐUBÍTUR ALM.HARD.1,8MM PVC (6)

Diagonal Cutter, 180 mm

• The indispensable diagonal cutter for all-round use
• High-quality material and precise workmanship for long service life
• Precision cutting edges for soft and hard wire
• Clean cutting of thin copper wires, also at the cutting edge tips
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC
• Narrow head style for use in confined areas
• Vanadium electric steel, forged, multi stage oil-hardened

SÍÐUBÍTUR ALM.HARD.1,8MM PVC (6)

Diagonal Cutter, 110 mm

• The indispensable diagonal cutter for all-round use
• High-quality material and precise workmanship for long service life
• Precision cutting edges for soft and hard wire
• Clean cutting of thin copper wires, also at the cutting edge tips
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC
• Narrow head style for use in confined areas
• Vanadium electric steel, forged, multi stage oil-hardened

BLAÐ Í RÖRA KLIPPUR 185MM

Spare blade for 90 20 185 Cutter for flexible hoses and plastic conduit pipes

RÖRA KLIPPUR 185MM (6)

Knipex PlastiCut - Cutter for flexible hoses and plastic conduit pipes

• Chrome plated, tough fibreglass reinforced plastic handles
• For cutting thin walled plastic pipes (conduit plastic pipes) and flexible hoses, also with fabric reinforcement, of plastic and rubber up to 25.0 mm / 1" exterior dia.
• Not suitable for cutting cables
• With opening spring and locking device
• Tool body: plastic, fibreglass-reinforced
• Blades: special tool steel, oil-hardened, interchangeable

RÖRA KLIPPUR 210MM (6)

Pipe Cutter, for composite pipes


• For cutting composite pipes with diameters from 12.0 to 25.0 mm and for cutting flexible protective tubes with a diameter of 18.0 - 35.0 mm without damaging a potential pipe inside
• A calibration arbor can be fitted, for example for Geberit composite pipes with 11.5 and 15.0 mm dia.
• Tool body: high-grade chrome vanadium electric steel, oil-hardened
• Blades: special tool steel, oil-hardened, interchangeable

SÍÐUBÍTUR M/FJ.*125MM (6)

Electronic Super-Knips, with lead catcher, 125 mm

• Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
• Ground, very sharp cutting edges without bevel
• Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
• Precision shaped tips cut wires resting on a board from 0.2 mm dia.
• Joint with stainless steel rivet
• Extremely smooth movement for minimum operator fatigue
• With lead catcher - no uncontrolled loss of cut wire ends
• Cutting edge hardness approx. 54 HRC
• INOX - tool steel
• With opening spring and opening limiter
​• Multi-component grip handles

AFEINANGRUNAR/SKERI Cc22 165MM (6)

Cable Shears

• To cut Cu- and Al cable, single and multi-wire to Ø12 mm or 35 mm²
• Not suitable for steel wire and hard-wired copper conductors
• Cut smoothly and accurately without deforming
• Clamp guard prevents clamping damage
• High quality special steel, forged, oil-hardened
• Handle disguised with non-slip plastic
• Rotation of the tool at 180 ° ends the cutting edge outwards
• Can be used for cable insulation
• 2 cutting positions

Skæraklippur. (Bein) Fjöður (6)

Combination Shears

• For cutting cardboard, plastics, aluminium, brass and copper foils
• Not suitable for steel wire or iron sheets
• Precision-ground, hardened blades
• With opening spring and locking device
• Guard prevents operators’ fingers being pinched
• Adjustable bolted joint
• Shears body: surgical steel, stainless, vacuum-hardened
• Handles: plastic, impact-proof

BOLTAKLIPPUR COBOLT. 3,6MM M/FJÖÐUR (6)

Cobolt Compact Bolt Cutters, with opening spring

• Precision cutting edges for soft and hard wire as well as piano wire
• Cuts bolts, nails, rivets, etc. up to 5.2 mm dia.
• Most efficient joint design ensures exceptional cutting performance with little effort
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
• Improved cutting performance
• Micro-structured cutting edge allows easy cutting of large cross-sections
• With gripping surface below the joint for gripping and pulling wires with a diameter as from 1.0 mm
• With slim multi-component grips without collar for better handling and easier transport
• Opening spring and locking device are integrated in the handles also for comfortable work and protected transport
• Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened
• Slim multi-component grip handles

NAGLBÍTUR 300MM H / VOGARAFL (6)

High Leverage Concreters’ Nippers

• 25 % less effort required compared to conventional concreters’ nippers of the same size
• Extra-slim form for tying deep mounted steel rods
• To lace concrete reinforcing steel with binding wire from a roll
• Wire is twisted and cut in a single pass
• High-leverage joint, minimising strain, even when thick binding wires are used
• The high damping of the cutting stroke on cutting through the binding wire reduces the strain on tendons and muscles
• Cutting edges additionally hardened; cutting edge hardness approx. 61 HRC
• High-grade special tool steel, forged, multi stage oil-hardened

Sýni 1-20 af 29 hlutum
Vörumerki