loading

Einar Ágústsson & Co. Sími:  577-3900

Röðun
Múrbolti Heitg - 24 x 260/100 [10] HDG

R-XPT-HD Hot Dip Galvanized Throughbolt, Box of 10
24 x 260 mm

• Increased corrosion resistance due to hot dip zinc external protection layer
• R-XPT is suitable for reduced embedment to avoid contact with reinforcement
• Embedment depth markings help to ensure precise installation of the anchor
• Design of R-XPTII allows drilling and installing directly through the fixture and helps to reduce installation time
• High quality with cost effectiveness
• Cold formed body ensures consistent dimensional accuracy

Further technical information available on manufacturers website;
https://www.rawlplug.com/en/product/r-xpt-hd-hot-dip-galvanized-throughbolt

Tréskr. DYNAPL UZ C4 TX20 4,0X50MM (200)

Universal outdoor flathead screw

4,0 x 50 mm
TX 20
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

DYNAPL FATA UZ C4 TX25 6,0X120MM (200)

Universal outdoor flathead screw

6,0 x 120 mm
TX 25
Sold in buckets of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

DYNAPL FATA UZ C4 TX25 6,0X100MM (250)

Universal outdoor flathead screw

6,0 x 100 mm
TX 25
Sold in buckets of 250 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

DYNAPL FATA UZ C4 TX25 5,0X100MM (300)

Universal outdoor flathead screw

5,0 x 100 mm
TX 25
Sold in buckets of 300 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

DYNAPL FATA UZ C4 TX25 5,0X90MM (400)

Universal outdoor flathead screw

5,0 x 90 mm
TX 25
Sold in buckets of 400 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

DYNPL FATA UZ C4 TX25 4,5X70MM (700)

Universal outdoor flathead screw

4,5 x 70 mm
TX 25
Sold in buckets of 700 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX30 6,0X150MM (100)

Universal outdoor flathead screw

6,0 x 150 mm
TX 30
Sold in boxes of 100 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX30 6,0X120MM (100)

Universal outdoor flathead screw

6,0 x 120 mm
TX 30
Sold in boxes of 100 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX30 6,0X100MM (100)

Universal outdoor flathead screw

6,0 x 100 mm
TX 30
Sold in boxes of 100 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX30 6,0X90MM (100)

Universal outdoor flathead screw

6,0 x 90 mm
TX 30
Sold in boxes of 100 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX30 6,0X80MM (100)

Universal outdoor flathead screw

6,0 x 80 mm
TX 30
Sold in boxes of 100 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX25 5,0X120MM (200)

Universal outdoor flathead screw

5,0 x 120 mm
TX 25
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX25 5,0X100MM (200)

Universal outdoor flathead screw

5,0 x 100 mm
TX 25
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX25 5,0X90MM (200)

Universal outdoor flathead screw

5,0 x 90 mm
TX 25
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX25 5,0X60MM (200)

Universal outdoor flathead screw

5,0 x 60 mm
TX 25
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX25 4,5X60MM (200)

Universal outdoor flathead screw

4,5 x 60 mm
TX 25
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance

Tréskr. DYNAPL UZ C4 TX25 4,5X50MM (200)

Universal outdoor flathead screw

4,5 x 50 mm
TX 25
Sold in boxes of 200 screws

The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

• Nearly twice as strong as stainless steel screws
• No more screws that break while screwing in!
• Very high corrosion resistance due to Anti-Rust-coating
• Self-recovering ability of the AR-coating
• Excellent chemical an acid resistance
• Extremely low screwing resistance
 

Plastlok Ø14mm - RAL 7022 (100)

Screw Cover Caps, 14 mm diameter, dark grey.

Expandet Screw Cover Caps are a popular product for all kinds of screw covering uses both in construction, furniture and industrial settings where they are often used by Painters & Decorators to increase the aesthetic of visible screw heads. Manufactured from a Polypropylene these caps offer a reliably strong finishing option, coming in a variety of colors. 
Screw Covercaps give products a neat and finished look while also providing protection.They conceal and protect fasteners in point of sale products while providing a clean appearance. 

Plastlok Ø14mm - Brúnt (100)

Screw Cover Caps, 14 mm diameter, brown.

Expandet Screw Cover Caps are a popular product for all kinds of screw covering uses both in construction, furniture and industrial settings where they are often used by Painters & Decorators to increase the aesthetic of visible screw heads. Manufactured from a Polypropylene these caps offer a reliably strong finishing option, coming in a variety of colors. 
Screw Covercaps give products a neat and finished look while also providing protection.They conceal and protect fasteners in point of sale products while providing a clean appearance. 

Vörumerki